Gold Member Since 2016
Audited Supplier
Yangzhou Kangtai Medical Device Co., Ltd.

Medical Machine, X-ray Machine, Hospital Machine manufacturer / supplier in China, offering Yz-Ls-3 X-ray Machine Bucky Stand9, Yz-100c (100mA) 001 X-ray Machine/ Hospital Machine/ Medical02, Yz-200b 200mA X-ray Radiography Machine67 and so on.

(/ )

Supplier Homepage Product X-RAY MACHINE Yz-Ls-3 X-ray Machine Bucky Stand9

Yz-Ls-3 X-ray Machine Bucky Stand9

Purchase Qty.:
(Pieces)
1-9 10-99 100+
FOB Unit Price: US $1,150 US $1,050 US $980
Purchase Qty. (Pieces) FOB Unit Price
1-9 US $1,150
10-99 US $1,050
100+ US $980
Get Latest Price
Port: Shanghai, China
Production Capacity: 1000sets
Payment Terms: T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: YZ-LS
  • Form: Shipping
  • Type: Common Frequency
  • Customized: Customized
  • Trademark: qionghua
  • Specification: 227X68X78 cm
  • HS Code: 9022140090
  • Portable: Non Portable
  • Application: Diagnostic
  • Certification: SGS, ISO, Sales Free Certificate
  • Alarm Form: Display Alarm
  • Transport Package: Wooden Package
  • Origin: Yangzhou, Jiangsu
Product Description
  
YZ-LS-3  BUCKY STAND  
 X-ray  bucky stand Instructions


1 Generality
1.1 Purpose:
X-ray bucky stand can be photographed in a variety of medical diagnostic X-ray machine, on the human body the head, chest, abdomen and other parts of X-ray photography. The device in the vertical, the next move within the framework of an arbitrary orientation, positioning simple, flexible and reliable, using a wide range.
1.2 consists of:
This device consists of grids, cassette drawers, columns, sliding frames and other parts.
1 column
2 sliding frame
3 cassette drawer
4 brake handle
5 groove pulley
6 weight screws
7 floor
8 suspension wire rope

2 Installation instructions
2.1 Safety Tips:
Equipment, installation and operation of the relevant units, the installation must comply with.
This photo frame is a monolithic chip packaging, the product will balance the heavy hammer before the factory bolt for easy handling, the bolt removed before installation.
2.2 Room conditions:
Environmental conditions: 0 ~ 40
ºC
Relative humidity: ≤ 75%
Atmospheric pressure: 700kpa ~ 1060kpa
Room height: 2700mm above the door width of the receiving equipment room door size of 1200mm width dimension of not less than 900mm
Room construction: room walls, doors and windows of the X-ray protection should comply with relevant regulations, in addition to the environment must fully consider the room temperature, humidity, clean degree, in order to protect the life and appearance of products. Room may not be used within the flammable gas or liquid.
2.3-ray bucky stand in the engine room to determine the installation position must meet the following conditions:
2.3.1-ray film holder in the engine room installation location, you must maintain the holder panel centerline alignment radiography X-ray Center.
2.3.2 Radiography rack-mounted film cassette to the X-ray tube to keep the focus away from the nearest point of 1000mm, the farthest point of ≥ 1500mm.
2.3.3 The ray film photography bed frame and supporting the use of only the X-ray tube head rotated 90 °, to open limit beam splitter lighting to make the limited cross-line alignment beam splitter light chest film frame panel can be centerline, while pulling Open tape, you can easily measure the distance between the focus away from the film.
2.4 that the selected election radiography and X-ray tube frame
To determine the best location between the base position, the water
Mud-based area of not less than 500 × 500mm.

2.4.1 Setting cement base, cement-based subject to the level of
Scale calibration level degrees.
2.4.2.Drill two M8 × 94 I-type expansion bolt hole, and screw in the expansion bolt  buried.
2.5.x-ray film frame fixed
2.5.1 The expansion bolt according to location, chest X-ray frame in place and used to adjust the chip level adjustment, and then tighten bolts fastening nut, the chest X-ray frame fixed to ensure the chest X-ray planes perpendicular to the ground.
2.5.2 Product factory cassette drawer is left out of operation.





 
Product Groups
Send your message to this supplier
Avatar
Mr. Lyu Hong
Manager
*From:
To: Mr. Lyu Hong
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category